ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1966 Mustang => Topic started by: rrenz on October 29, 2018, 11:28:29 PM

Title: C-4 Shifter Housing Hardware
Post by: rrenz on October 29, 2018, 11:28:29 PM

Rebuilding my shifter. Im missing one of the screws that attaches the housing to the floor. This is what I pulled out. Im not seeing these on the spreadsheet.. Im also not seeing a comparable screw from any vendors. Would these be original or do I need to be looking for something else?

Title: Re: C-4 Shifter Housing Hardware
Post by: CharlesTurner on October 30, 2018, 12:11:39 AM

Typically a low profile hex bolt in either zinc or phosphate finish.

Title: Re: C-4 Shifter Housing Hardware
Post by: jwc66k on October 30, 2018, 12:23:17 AM

Look under "SHIFTER,AT,ADAPTER PLATE-HOUSING" in the 64-66 application spreadsheet. All the shifter items are there. The application should read "SHIFTER,AT,HOUSING-BODY@TRANS HUMP", and will in the next spreadsheet release. The screw is 20344-S7, 1/4-20X3/4HEX,FULL THREAD,7/16HEX.
Jim

Title: Re: C-4 Shifter Housing Hardware
Post by: rrenz on October 30, 2018, 08:27:54 PM

Great. Thanks