ConcoursMustang Forums

Marketplace => Wanted Ads => Topic started by: Brant on September 01, 2016, 11:56:52 AM

Title: WTB: 66 Oil Pressure Sending Unit NOS
Post by: Brant on September 01, 2016, 11:56:52 AM: Looking for an 65 w/gauges / 66 NOS oil pressure sending unit.

Can use either the logo as pictured or FoMoCo logo one. Would like to have the square base (where it is tightened) as pictured as opposed to the later hex style.

Will consider any date code.

(https://lh3.googleusercontent.com/J7u_429AWql4mYmP8OMvCQGJE_gh31D-uAVa-S1lsrZvzTd2y2bjYhqfZwFdg6foVQYtEaaxXSFbSqUKm2mfHf_hTmVX0meoLlsE0w2KzqG_bp_rvmwzHZpyd_6TvUpNWNHcM9Dk26Y4O4aQZkJMFGy4nrUnO5vfxiVmlEcxFTt2Kb5tGfi27nc3aFy5-fSOphJjeoJXwNWJJGVITKVFC9zomn2GGwn4PPP1NiMum9h5CMHAYwwneT9F9vaazdb2mM18lh0cbHNw_-ocdBfYLF4hh5ML3j_03E3S-1wmnhsHAuu0Yz1vxjTtiYsFRggORymPelqY4TWlIORFy-apJPQ2VpuNTrUTqtKC9vPRGZLAU2JFody3UWG3EwEKMWGh8tQ1Lw1oYC4B77Zj5mhoSz84kNsAehVW6J2CJOZgX2Q7suTfHSF1aQhTwjvTsdLa50x64qBju1HTzQMkz4DHpH-Ru7hZ63xvo0zxa6exIJMgcbUS29skya9yPm-6s7X8jQh5DQxB3-UH-ZXSl65_W-mNFy2gNNZDwJZS9kgoCBvTb5HoxdIO--vt3-FWfsw3me-x0qzz28UkTeumsI4rbtmyc0bWO_3JckK34UfcW550pxCQXA=w500-tmp.jpg)
(https://lh3.googleusercontent.com/T2L3fANNnw-OcprTx46VmAT_EDUmbVGJG49BASSIKNR9mrYQEUdUjMVIi_bUzyGBDQdmine2QB_CPCPKeR4vUQgO0hb30FvX0BKkfkEt-7SV6v76DMx0QbvReCJAaZ9HiazZNozHxs4nBarbyeNNFWcKt0NrqdSnnvNQVINgI0kHiPJFs42jImtqyh3oh-UPZfYob8GMI--aiKpxGqEtQR-nYpkjl7nTOv_HNgIxPiV9U2ETIYrjSXh0YsSwcRH3nxIegKgOJ08SRZ6wzF0M6lMW2Js6hbWqr64tnOwrzTOYx2jPOSzkoOHDN6WE0Ui5Kr3fDHWBMn8-_IaLohKxA6QdBEIdwxF6J1Bu1-Ae2-xIukVfrfmAMzzxdZ_DgsdncbrR8I_Afro64ceLOcVk6Q2HFVpP4U6HjfQZS4AKNm5eaI_9wuRE9WW4bwvtEU2ea5pyVNyLyHaFa8v4dFe3Dmbx9r39KtWPtvB6SmuRbVxOyoJRGWTUi9n-W9OX5IWl5TvLsvLSeq3F-dnQZDBJpH7Z8LV9Z6Uz9QtFnPC6g1mhWIBAIwauh5sAHJspGTvpW5zi4zjkuEjWvGcf6UYGuF_WgQubWeKHyNDKM_i0mXF_iZ8VJg=w500-tmp.jpg)
Title: Re: WTB: 66 Oil Pressure Sending Unit NOS
Post by: CharlesTurner on September 01, 2016, 12:06:14 PM: Brant: I've had these re-plated with good results. You'll need to screw a cap on the bottom and at the top, remove the brass nut and fiber seal, replace with a smaller washer and nut.
Title: Re: WTB: 66 Oil Pressure Sending Unit NOS
Post by: Brant on September 01, 2016, 12:42:01 PM: Quote from: caspian65 on September 01, 2016, 12:06:14 PM
Brant: I've had these re-plated with good results. You'll need to screw a cap on the bottom and at the top, remove the brass nut and fiber seal, replace with a smaller washer and nut.

Thanks for the tip, Charles.

Do you have any good used ones? I'll try it.
Title: Re: WTB: 66 Oil Pressure Sending Unit NOS
Post by: CharlesTurner on September 01, 2016, 01:35:34 PM: Quote from: Brant on September 01, 2016, 12:42:01 PM
Thanks for the tip, Charles.

Do you have any good used ones? I'll try it.

I don't right now, but will check around.
Title: Re: WTB: 66 Oil Pressure Sending Unit NOS
Post by: hopeto on September 08, 2016, 04:12:52 PM: Not sure if it's correct for what you are looking for. Marked 100 on one side of the square and H6 on the other side.
(http://i399.photobucket.com/albums/pp75/hopeto/oilsender1_zpsduaybv1g.jpg) (http://s399.photobucket.com/user/hopeto/media/oilsender1_zpsduaybv1g.jpg.html)
(http://i399.photobucket.com/albums/pp75/hopeto/oilsender2_zpskin86h3x.jpg) (http://s399.photobucket.com/user/hopeto/media/oilsender2_zpskin86h3x.jpg.html)
(http://i399.photobucket.com/albums/pp75/hopeto/oilsender3_zpsgaelwfmd.jpg) (http://s399.photobucket.com/user/hopeto/media/oilsender3_zpsgaelwfmd.jpg.html)
Title: Re: WTB: 66 Oil Pressure Sending Unit NOS
Post by: Bob Gaines on September 08, 2016, 10:15:00 PM: Quote from: caspian65 on September 01, 2016, 12:06:14 PM
Brant: I've had these re-plated with good results. You'll need to screw a cap on the bottom and at the top, remove the brass nut and fiber seal, replace with a smaller washer and nut.
You must exercise extreme caution when loosening and taking off the top nut. You have to keep the thread stationary while removing the nut. If you spin the threaded section you risk breaking the internal connection and rendering the sender useless.
Title: Re: WTB: 66 Oil Pressure Sending Unit NOS
Post by: Brant on September 09, 2016, 01:50:15 PM: Quote from: hopeto on September 08, 2016, 04:12:52 PM
Not sure if it's correct for what you are looking for. Marked 100 on one side of the square and H6 on the other side.

Thanks. Sent you a message.
Title: Re: WTB: 66 Oil Pressure Sending Unit NOS
Post by: Brant on September 09, 2016, 01:50:47 PM: Quote from: Bob Gaines on September 08, 2016, 10:15:00 PM
You must exercise extreme caution when loosening and taking off the top nut. You have to keep the thread stationary while removing the nut. If you spin the threaded section you risk breaking the internal connection and rendering the sender useless.
Thanks for the tip, Bob.
Title: Re: WTB: 66 Oil Pressure Sending Unit NOS
Post by: outlawincorporated on September 09, 2016, 07:35:36 PM: any idea what the 100 casting into the brass end relates too.........????

all of my originals have a stamping of 80 not the 100

regards.

PHILL BERESFORD.
MELBOURNE.
AUSTRALIA.
Title: Re: WTB: 66 Oil Pressure Sending Unit NOS
Post by: CharlesTurner on September 09, 2016, 09:36:40 PM: Quote from: outlawincorporated on September 09, 2016, 07:35:36 PM
any idea what the 100 casting into the brass end relates too.........????

all of my originals have a stamping of 80 not the 100

My guess is the max pressure rating.