ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1970 Mustang => Topic started by: kcodecoupe on August 27, 2015, 09:41:35 PM

Title: correct hole for radio antenna cable
Post by: kcodecoupe on August 27, 2015, 09:41:35 PM

which hole in the right side cowl panel is for the radio antenna cable to go through on a 70 sports roof, a picture would be great, thanks.

Title: Re: correct hole for radio antenna cable
Post by: J_Speegle on August 27, 2015, 10:55:56 PM

Top picture appears not to use the typical hole but does show (not the greatest) antenna cable clip  right at the grommet at the time of the picture and the grommet.


The lower picture is where they were routed through (red arrow) through. That may be the retainer clip and insulator at the purple arrow


Hope this helps


Early Dearborn

(http://www.concoursmustang.com/forum/gallery/4/6-270815205429.jpeg)


(http://www.concoursmustang.com/forum/gallery/4/6-270815205510.jpeg)

Title: Re: correct hole for radio antenna cable
Post by: kcodecoupe on August 29, 2015, 09:11:36 AM

Thank you for posing the pictures jeff, the lower hole is what i will use, it also has a small hole for a retainer clip right below it ,

Title: Re: correct hole for radio antenna cable
Post by: Anghelrestorations on August 29, 2015, 12:00:41 PM

You can also find additional details and pictures you wanted on this article I put together earlier this year:

http://anghelrestorations.com/uploads/3/1/7/6/3176630/antennas_v1.1.pdf (http://anghelrestorations.com/uploads/3/1/7/6/3176630/antennas_v1.1.pdf)