ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1969 Mustang => Topic started by: kcodecoupe on July 26, 2015, 10:14:12 PM

Title: defroster dash inserts
Post by: kcodecoupe on July 26, 2015, 10:14:12 PM

Was there defroster duct dash inserts on 69-70 cars AC or non AC  ,

Title: Re: defroster dash inserts
Post by: J_Speegle on July 28, 2015, 05:32:40 AM

Not sure what your describing. The defroster (with the ducts through the slots at the front of the dash pad)  was standard with both AC and Non AC Mustangs.

Yellow arrow indicates the defroster duct on a AC 69


(http://www.concoursmustang.com/forum/gallery/4/6-280715032936.jpeg)

Title: Re: defroster dash inserts
Post by: kcodecoupe on July 28, 2015, 07:52:33 AM

Thank you for posting the picture, i was refering to the top of the dash where the lower defroster duct assy meets the dash pad, was there some kind of insert for each of the two openings on the dash pad that would connect with the defroster duct that you have pictured and would be installed from the top of the dash pad after the dash pad was installed,

Title: Re: defroster dash inserts
Post by: Brian Conway on July 28, 2015, 09:10:19 AM

     This is how the non AC dash defroster vents look on my car.  No inserts.  Brian

Title: Re: defroster dash inserts
Post by: kcodecoupe on July 28, 2015, 01:55:04 PM

Thanks for posting the picture brian, that is what i thought they should look like, there is a guy over at the boss 302 site looking for defroster inserts that he says are missing,

Title: Re: defroster dash inserts
Post by: J_Speegle on July 28, 2015, 05:59:03 PM

Quote from: Brian Conway on July 28, 2015, 09:10:19 AM

     This is how the non AC dash defroster vents look on my car.  No inserts.  Brian

+1 - No "inserts"

Not sure where that idea came from - didn't see that thread over on the other site or likely would have responded

Title: Re: defroster dash inserts
Post by: kcodecoupe on July 29, 2015, 06:15:12 AM

Quote from: J_Speegle on July 28, 2015, 05:59:03 PM

+1 - No "inserts"

Not sure where that idea came from - didn't see that thread over on the other site or likely would have responded

  Its in the WTB section titled defroster dash vent inserts,