ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1970 Mustang => Topic started by: machm1970 on March 17, 2015, 09:57:23 PM

Title: '70 302 w A/C PCV hose
Post by: machm1970 on March 17, 2015, 09:57:23 PM

I'm finally getting my car back together, it's an F code 302 w A/C. Is the PCV hose supposed to be molded or just a regular piece of hose? It looks a little out of place just being a plain piece of hose, it makes a big loop on top of the valve and interferes with the water valve on the heater hose.

Thanks,

Matt   

Title: Re: '70 302 w A/C PCV hose
Post by: J_Speegle on March 18, 2015, 01:18:24 AM

Molded

Plenty of things have been replaced in this picture - the PCV hose is not one of them ;)

(http://www.concoursmustang.com/forum/gallery/3/6-170315231756.jpeg)

Title: Re: '70 302 w A/C PCV hose
Post by: machm1970 on March 18, 2015, 09:25:04 AM

Thanks! Now I just have to find one. The catalogs I have don't list it.

Title: Re: '70 302 w A/C PCV hose
Post by: 69RavenConv on March 18, 2015, 10:18:24 AM

A google search for "70 ford 302 pcv hose" will bring up a few suppliers.
Note the correct style ring/spring clamps as well.

Title: Re: '70 302 w A/C PCV hose
Post by: machm1970 on March 18, 2015, 11:35:48 AM

I've looked, all I can find are for 66-68 289 and 302, Boss 302, 351W and 351C.

Thanks,

Matt

Title: Re: '70 302 w A/C PCV hose
Post by: J_Speegle on March 18, 2015, 04:29:04 PM

Quote from: 69RavenConv on March 18, 2015, 10:18:24 AM

......Note the correct style ring/spring clamps as well.

Noticed some (that came up in the search) have spring clamps at both end of the hoses. From original cars I'm seeing this was not always the practice during 79 on these engines. Would say that all should have had one at the back of the carb. These are just the typical ones that were used from early 60's on through